Welcome to UsedOpticalLab.com

Barry Shepard 714-963-8991 (Ca)
Barryshepard@verizon.net

Where optical professionals come to buy & sell quality used and rebuilt optical machinery

  • Browse the Used Equipment List

    If you're interested in an item, contact Barry Shepard for additional purchasing and product information

    Most rebuilt equipment is sold with a 90 day warranty by the seller.

    Although item condition is thoroughly evaluated and expressed as accurately as possible, used equipment is sold 'as is,' with no warranty

    Particulars:

    Buyer will complete the sale via direct communication with the seller

    Buyer is responsible for shipping, insurance, and special packing

  • There is no charge for listing your equipment!

    After price and condition are set, the item will be listed on the extensive UsedOpticalLab mailing and on UsedOpticalLab.com, reaching over 2500 laboratories and 22,500 optical professionals every month!

    Setting up your listing:

    Contact Barry Shepard via phone or email to set up your listing

    Selling an item:

    Potential buyers contact UsedOpticalLab and are screened prior to initiating contact with you (the seller)

    After a credible potential buyer is found, your contact information is sent to the buyer

    Negotiation is traditionally performed directly between buyer and seller, though assistance from UsedOpticalLab can be provided in select cases

    General Information:

    There is no charge for listing your equipment!

    After price and condition are set, the item will be listed on the extensive UsedOpticalLab mailing and on UsedLabs.com, reaching over 2500 laboratories and 22,500 optical professionals every month!

    Setting up your listing:

    Contact Barry Shepard via phone or email to set up your listing

    Selling an item:

    Potential buyers contact UsedOpticalLab and are screened prior to initiating contact with you (the seller)

    After a credible potential buyer is found, your contact information is sent to the buyer

    Negotiation is traditionally performed directly between buyer and seller, though assistance from Used Labs can be provided in select cases

    Commission:

    When a item sells, UsedOpticalLab charges commission on the item based on a fixed percentage, agreed upon prior to listing the item and confirmed via email

    Equipment Guidelines:

    Pictures must be readily available

    All items are sold 'as is,' with no warranty

    Items must be free from encumbrances

EDGING & BENCH EQUIPMENT…Call for Pictures

 Coburn / Huvitz 910 Auto blocker and tracer and Coburn /Huvitz HPE 910 edger/ integrated drill , 6400 cuts since new….$24,995 (California owner retiring )

The Huvitz HAB-910 and HPE-910 form a high-speed, automated ophthalmic lens processing and finishing package designed for modern optical labs and stores. [1, 2, 3]

Huvitz HAB-910 (3-in-1 Smart Auto Blocker)

  • Functionality: Combines a 3D frame tracer, a lensmeter, and an automated lens blocker into a single, compact unit for one-stop measurement and blocking. [1, 2]

  • Measurement Tech: Uses a Hartman lensmeter and retroreflection technology to eliminate prism errors and speed up processing. [1]

  • Display & Interface: Features a 9.7-inch color TFT LCD touch screen (1024 x 768 resolution) with a tiltable screen. [1]

  • Key Software & Editing: Includes a digital pattern generator, hole editor, asymmetric bevel editor, scan & cut shape editor, and step bevel editor with OMA import/export compatibility. [1]

Huvitz HPE-910 (Patternless Lens Edger)

·         Speed & Performance: Delivers an average 80-second edging time—operating roughly 50% faster than previous models with increased motor and lead-screw power. [1, 2, 3]

·         Step Bevel & Finishing: Supports 35 combinations of step beveling across 7 types and 5 edge styles, making it ideal for high-curve sports goggles, sunwear, and complex exotic shapes. [1, 2, 3]

·         Materials Handled: Processes CR-39, polycarbonate, high-index, Trivex, and glass lenses. [1, 2]

·         Edging Options: Supports standard bevels, grooves, rimless polishing, mini-bevels, asymmetric/semi-U bevels, hybrid grooving, and features an integrated/optional high-durability drilling arm. [1, 2, 3]

·         Display & Build: Equipped with a 9.7-inch color touch screen (1024 x 768) and a heavy-duty frame weighing roughly 50 to 51 kg depending on the voltage variant (AC 100–240V). [1, 2]

 

1        Santinelli ICE-Intelligent blocker, near new condition….$7995 reduced $4995.00   (N Calif Bat)

1   National Optronics QMX 4 edger, 10,000 cuts since new….$19,995 reduced to $11,995 to  (N Calif Bat)

1   National Optronics QMX 3 edger, 14, 000 cuts since new…..$19,995 reduced to $11,995 (N Calif Bat)

1   2025 National Optronics QMX 4….200 lens cut since new in December 2025….was $60,000…reduced to $34,995…seller selling because it is not as fast as an MEI 641

 1 SATISLOH / National Optronics ES-CURVE Edger, 35,000 pair of lenses cut since new,  five axis with articulating bevel, groove, and drilling process provide the best fit for challenging shapes and wraps. Seven on-board tools allow for multitask edging, and additional tools for complete edging capabilities can be programmed…very good condition $9995.00(S Calif  BL)

1 Santinelli 7070 pattern-less edger and tracer, 9456 lenses cut….$2495 (Calif)

1 Nidek LT 980 Satellite tracer, near new condition, recent yearly preventative maintenance by Nidek…….$2995(Canada)

1 National Optronics 7E pattern-less edger  and 4T tracer package, very low retail usage…..$ 6495(NC)

1 National Optronics 6Es pattern-less edger  and 4T tracer package, used at retail, under 33,000 cuts since new…..$ 4995 or best offer(SD)

8 National Optronics 7E edgers and 4T tracers, refurbished by North America’s leading edger rebuilder, 6 month warranty…$12,995 ea pkg

10 National Optronics 7E HLP Pattern-less edger and 4T tracer, refurbished by North America’s leading edger rebuilder,  6 Month warranty.$14,995 ea

 14 National Optronics 7EX Pattern-less edger and 4T tracer, refurbished by North America’s leading edger rebuilder,   6 Month Warranty…. $19,995

8 National Optronics 4T tracers, rebuilt, 6 month warranty…$2400(ea )

1 B&L Lensometer, re-built by North America’s leading re-builder, new condition $795(Kansas)

1 set of three B&L prism rings, excellent condition…$200(Idaho) 

Used and Rebuilt surfacing equipment…call or E-Mail  for pictures

1 Optek Contour Max generator and stand , 7000 lenses cut since new in 2019, new condition …..$12,995

( Louisiana USA)

2      National Optronics 2G generator, rebuilt by North America’s leading 2G specialist…..$9995(NC T)

5       Satis / LOH X2S cylinder machines, rebuilt to new condition….$5000 ea(Minn)

1        Satis / LOH X2S cylinder machine, low usage , very good condition…..$2495(Fla)

 3       Optek #425 cylinder machines, parts machines….$300 ea (Fla Rebuilder)

Sold>>>1 Ultra Optics Mini 11 hard coater only, good condition …$2995

1 Ultra Optics MR 111 hard coating machine, very good condition , new model   $10,995(Florida)

1 2018 A&R “Dual Lens Mapper”, new condition… $25,000….The A&R machine measures the surface of a lens to create a height map file (like a contour map), and compares it to the height map file provided by the lens design company(California)

5300 newer style “job trays, 26cm x 22cm x 7cm, very clean , look like new….Toronto Canada)

1000 or more at $1.00 each, 500 to 999 at $1.50 each ,less than 500 trays… $2.00 each

(Tray colors include : Blue, Dark blue, Purple, white, yellow, black, green, grey and orange)

 One Optek AL 118Lens gauge / Lapometer has a rotating base and measures the base curve up to 25 +diopters  and cross curve to -12 diopters(Louisiana)……….New condition…$795 (Louisiana)

1 Coburn CS7 Marker, rebuilt to new by Optical Works…. $695( Louisiana USA)

2  Elkay Chillers #ER1 .... $300 ea ( Louisiana USA)

1 OWC compact Space Saver alloy blocker, new in box $2795( Louisiana USA)

5 ½ pounds of new in the box #117 alloy…..$89.00 pound ( Louisiana USA)

9 1/2 pounds of new in the box #117 alloy…..$89.00 pound ( Louisiana USA)

1 Branson 3510 table top ultra sonic machine, new condition $495(N Calif)

1 Kendal Table top ultra sonic machine, stainless steel, dual control, near new condition…$795(N Calif)

1 DCE  Vacuum, “Unimaster industrial model” , powerful….$595 (N Calif)

Freeform Machinery

1 Freeform 2014 OptoTech ASP 80 Double in excellent working condition. Videos and photos available.  Priced to sell at $39,500. (North East Pa)

AR EQUIPMENT…call for pictures

1 Leybold Buhler 2007 CCS Pro-lite, AR Coating system, 24 pair per batch, fully rebuilt to OEM spec like new, with , tooling, manuals, turnkey system .  Install, training and processes available on request . Can be seen running and comes with warranty, Compact and low power usage$80,000 USD(Rebuilder)

SOLD>>>1 Leybold CCS 11 AR /  machine, 2003 “light” model, includes “Polycold R2000” , includes Leybold’s Jade formulas, 48 lenses per cycle, very low usage,$49,995 (N Calif)

1 Leybold Buhler 2007 CCSpro, AR Coating system, 24 pair per batch, fully rebuilt to OEM spec like new, with polycold, tooling, manuals, turnkey system .  Install, training and processes available on request . Can be seen running and comes with warranty, Compact and low power usage….$100,000 USD(Rebuilder)

1 Zeiss  LCS 550 AR machine, has basic AR process loaded, holds 34 lenses, cycle time 50 minutes., two domes included, spare computer included….$29,995(Wisconsin)

1 Leybold /Optimal CHC 40, nine  tank wash line / dip coater, good condition, low usage $14, 995

(N California)

1 Optimal Technologies automated CHC 40 wash line and dip coater……..capable of producing up to 72 lenses per hour….$9,995 ( S Cal)

1 2022 Optimal Technologies CHC-60 Automated Ultrasonic cleaning and hard-coating system designed for ophthalmic labs….processes up to 40 lenses per hour and handles a variety of premium lens treatments, including scratch -resistant, ant-fog, and hydrophilic coatings….$75,000 (Mexico City)

1 Denton Vacuum C-10 hydrophobic chamber…$5000(Nevada)

 Deionized water recovery machine for AR ….$3500(Colorado)

Specially made for equipment utilizing DI water for ultra sonic cleaning etc. 

Unit recycles DI water back through DI tanks extending the water life five fold. 

Has a Mega-ohm meter to constantly monitor water quality.

Pays for itself quickly.  Excellent condition, and easy to install.

$3500.00 plus shipping and crating costs .(Colorado)

 DO YOU WANT TO SELL YOUR USED OPTICAL EQUIPMENT?

 Call me  or e-mail to me and I’ll give you a “no charge” estimate of your equipment’s value….714-963-8991            

E-mail     barryshepard@verizon.net

All of the  descriptions of equipment listed are those of the sellers….due diligence in purchasing is suggested

 If you no longer want to receive my fax or e-mail mailing…e-mail or call me and I’ll remove your fax number or e-mail.

Barry Shepard 714-963-8991(California) 

www.usedopticallab.com

 

 

 

 [BS1]